| Input Field |
Note |
Image |
|
|
111 Manual metal arc welding
114 Self-shielded tubular cored arc welding
131 MIG welding with solid wire electrode
135 MAG welding with solid wire electrode
136 MAG welding with flux cored electrode
138 MAG welding with metal cored electrod
141 TIG welding with solid filler material
142 Autogenous TIG welding
143 TIG welding with tubular cored filler material
145 TIG welding using reducing gas and solid filler material
311 Oxyacetylene welding
|
|
|
|
|
|
|
|
|
|
|
|
lw Leftward welding
rw Rightward welding
|
|
|
|
P Plate
T Tube (or pipe), hollow sections
|
![Weld Type Image]() |
|
|
BW Butt weld
FW Fillet weld
|
![Weld Type Image]() |
|
|
FM1 Non-alloy and fine grained steels
FM2 High strength steels
FM3 Creep-resisting steels Cr<3.75%
FM4 Creep-resisting steels 3.75%≤Cr≤12%
FM5 Stainless and heat-resisting steels
FM6 Nickel and nickel alloys
|
|
|
|
1 Steels with a specified minimum yield strength ReH≤460 MPa
2 Thermomechanically treated fine-grain steels and cast steels
with a specified minimum yield strength ReH≥360 MPa
3 Quenched and tempered and precipitation hardened fine-grain
steels except stainless steels with a specified minimum yield
strength ReH≥360 MPa
4 Low vanadium alloyed Cr-Mo-(Ni) steels with Mo≤0,7 % and V≤0,1 %
5 Cr-Mo steels free of vanadium with C≤0,35 %
6 High vanadium alloyed Cr-Mo-(Ni) steels
7 Ferritic, martensitic or precipitation-hardened stainless steels with C≤0,35 % and 10,5%≤Cr≤30%
8 Austenitic stainless steels, Ni≤35 %
9 Nickel alloy steels with Ni≤10,0 %
10 Austenitic ferrite stainless steels (duplex)
11 Steels covered by group 1 except 0,30 %<C≤0,85 %
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
If the thicknesses are the same (t1=t2),
only the value of t1 needs to be entered.
If case of Tube to Plate weld,
t1 represents the thickness of the plate, and
t2 represents the thickness of the tube wall.
|
 |
|
|
|
|
|
|
|
 |
|
|
|
![Weld Position Image]() |
|
|
|
|
EN ISO 9606-1:2017 - Qualification testing of welders
Slovenščina (ver. 07.11.25)